top of page

Civil, Marine & Subsea Construction and Engineering

Engineering Technology Services (ETS) – home

Commercial diving and underwater welding

Surface-supplied diving for inspection, NDT, repair and construction on marine infrastructure across Western Australia.

Diver tightening flange bolts on a subsea pipe

Class A

Wet welding to AWS D3.6M Class A, the highest class of underwater weld and suitable for structural repairs.

15+ years

Core personnel with more than 15 years' subsea experience, including major international construction projects.

In-house engineering

Inspection findings are assessed in-house for corrosion and structural integrity, with repair recommendations in the report.

Diver wet welding on a flange underwater

UNDERWATER WELDING

Class A wet welding

AWS D3.6M is the code for underwater welding, and Class A is its highest weld class. A Class A weld must meet the same mechanical property and testing requirements as the equivalent weld made above water, so it can be used on load-bearing structural members.

For many repairs this means the work can be done wet, avoiding the cost and programme of a dry hyperbaric habitat. Class B welds are also available where specified.

Subsea capabilities

Bathycorrometer kit for cathodic protection surveys

Inspection and NDT

Condition assessment of submerged steel and concrete structures by visual inspection and non-destructive testing.

  • General and close visual inspection (GVI / CVI)

  • Ultrasonic wall-thickness measurement (UTWT)

  • ACFM weld and crack inspection

  • P-Scan corrosion mapping

  • Flooded member detection (FMD)

  • Cathodic protection potential surveys

  • CSWIP diver inspection

Diver wet welding underwater

Underwater welding and cutting

Wet welding to AWS D3.6M:2017 Class A, B and O, and thermal cutting for repair and removal.

  • Pile, bracing and bracket repairs

  • Doubler and patch plate installation

  • Ultrathermic cutting (Broco)

  • Oxythermic cutting (Exodus)

  • Removal of redundant steelwork

Two divers fitting a clamp on the seabed

Subsea construction and decommissioning

Surface-supplied diving support from jetties, wharves, barges and vessels.

  • Construction and demolition diving support

  • Complex subsea lifts and rigging

  • Sacrificial anode installation and repair

  • Pile wraps and corrosion protection systems

  • Asset decommissioning and recovery

WE WORK ON    Jetties and wharves  ·  Bridges  ·  Sheet pile walls  ·  Seawalls  ·  Boat harbours and marinas  ·  Moorings and navigation aids  ·  Vessels

Need divers on a job?

To prepare a quote, send us:

✓  Scope of work

✓  Water depth, if known

✓  Drawings or photos

✓  Preferred timing

✓  Location and access

or call 08 9742 1882

Diving operations to AS/NZS 2299.1 · ADAS Part 2 and 3 divers · ISO certified

bottom of page